Design and Development, Production, Marketing. Manufacturer, Exporters Quality Products such as Instrumentation Valves, Precision pipe Fittings, PTFE products, pipe fittings, flanges, valves, fasteners at cheap rates only at Kurat Enterprise from India.

kurat Logo  
Feedback
» Instrument Fittings
» Double Ferrule Compression Tube Fittings
» 37 Degree Flare Fittings
» Flareless Tube Fittings as Per DIN 2353
» Precision Pipe Fittings
» Quick Disconnect Couplings
» Pipe Fittings
» Instrument Valves
» Needle Valves
» Manifolds Valves
» Ball Valves
» PTFE Components
» PTFE Components
» PTFE Coating / PVDF Coating and Lining
» Assessories and Consumables
» Thermowells
» Brass Cables & Glands
» Tube and Pipe Clamps
» Condensate Pots
» Syphons
» Hoses
» Consumables
   

Assessories and Consumables

Assessories and Consumables > Brass Cables & Glands > Earthing Materials >>
 
B W Cable CW Cable D1W Cable E1W Cable 4 Part Cptive Cone A2 Type Cable Earthing Materials
 
Earthing Materials
99.9 % pure electrolytic copper molecularly bonded onto a steel core in accordance with national and international standards to a thickness of 0.25 mm. Note : Rods are not of the sheathed type. There is no metal interface. So dissimilar metal reaction cannot occur and the copper cannot be separated from the steel. The core is of low carbon steel of grade 080A20 of BS970 with a high tensile strength of at least 600 n / mm2. Threads are rolled onto the rod which ensures that an even copper covering is maintained, even at the root of the thread.
 

Earthing Rod Selection Chart

Nominal Diameter

Dimensions Length (mm.)

Thread Diameter
"A"

Shank Diameter
"B" ( mm. )

3/8"

1200

unthreaded

8.9

"

1200

9/16"

12.7

"

1500

9/16"

12.7

"

1800

9/16"

12.7

"

2400

9/16"

12.7

5/8"

1200

5/8"

14.2

5/8"

1500

5/8"

14.2

5/8"

1800

5/8"

14.2

5/8"

2400

5/8"

14.2

5/8"

3000

5/8"

14.2

3/4"

1200

3/4"

17.2

3/4"

1500

3/4"

17.2

3/4"

1800

3/4"

17.2

3/4"

2400

3/4"

17.2

3/4"

3000

3/4"

17.2

 
Driving Heads / Studs / Tips, Dowell Pins
Made from High Tensile Steel to ensure force from power hammer. Dowell Pins are also made from High Grade Brass.
 
Clamps
 
Earth Plates
 
Earth plates are supplied in solid or lattice type. These can be supplied in solid copper or M.S. Copper Coated.
 
Lattice
 

Lattic size (mm)

500 X 500 X

3

600 X 600 X

3

900 X 900 X

3

 
Solid
 
Earth plate size (mm)
500 X 500 X

3

500 X 500 X

5

600 X 600 X

3

600 X 600 X

5

 
Bare Copper tape & tinned Copper tape
 
Enquires are also Solicited for bare copper tape, high conductivity, annealed, as per BS1432 - C101 and tinned copper tape, in any size including sizes from 20 x 3mm. to 50 x 6mm. - in coil form as well as in strip form.

From low budget housing - even M.S. hot dip galvanised earthing strips can be supplied.
 
Flexible Copper braid
 
Flexible Copper braid manufactured from high conductivity copper wire to BS4109 - C101, suitable for earthing bonding, can be supplied in roll form as well as cut length.
 
Crimping Type Tinned Copper Cable Lugs With/Without Inspection Hole
 
Range : 1.5mm2 to 1000mm2

Type : Heavy & Light

Stud holes and barrel length are available with various sizes and options as per buyer's requirement.
 
Soldering Type Tinned Copper Weak Back Ferrules
 
Range : 1.5mm2 to 1000mm2

Type : Heavy & Light

Stud holes and barrel length are available with various sizes and options as per buyer's requirement.
 
Tinned Copper End Sealing Ferrules
 
Range : 0.5mm2 to 35mm2
 
Tinned Copper Connectors With Solid Barriers
 
Range : 16mm2 to 400mm2
 
Tinned Copper Transformer Terminal Ends (4 Holes)
 
Range : 500mm2 to 630mm2
 
Tinned Copper Two Hole / Extended Palm Terminal Ends
 
Range : 25mm2 to 630mm2
 
Uninsulated & Insulated Terminal Ends
 
Range : 1.5mm2 to 1Omm2
Type Ring, Spade, Pin & Blade.
 
Aluminium Long Barrel Lugs
 
Range : 25mm2 to 1000mm2
 
Aluminium Long Barrel Through Connectors & With Solid Barrier
 
Range : 25mm2 to 1000mm2
 
 
 
 
Request A Quote
 

Contact us :
Kurat Enterprise
67/69, Jubilee Bldg., Ground Floor,
Opposite Kalyan Bldg., Near Navjeevan Society,
P.B. Marg, Grant Road, Mumbai - 400 008. India
Tel: +9122 2300 2114 Fax: +9122 2300 2114
Email: infokurat@gmail.com
Website: www.kuratentp.com
www.instrumentationfittings.com

All Trademarks and/or Trade names are the properties of their respective owners

Disclaimer : The information contained herein is accurate to the best knowledge and belief of Kurat Enterprise, and specification quoted may change without prior notice. Information contained in this technical literature is believed to be accurate and is offered in good faith for the benefit of the customer. More...

   
© Copyrights 2008 - 2009. Kurat Enterprise. All Rights Reserved. Designed by Xclusive Kreators